Difference between revisions of "MRI lab: FPGA controller documentation"
From Course Wiki
| Line 38: | Line 38: | ||
|- | |- | ||
|ADC DMA source | |ADC DMA source | ||
| − | |4 | + | |5:4 |
| − | | | + | |0X = test mode (DAC output); 10 = adc input (normal operation); 11 = adc test signal (count) |
| | | | ||
|} | |} | ||
==API== | ==API== | ||
Revision as of 00:54, 18 June 2010
Control registers
| Register | Bits | Function | device |
|---|---|---|---|
| PhaseIncrement | 31:0 | Frequency of generated sinewave | /dev/pio_phaseIncrement |
| Pulse1On | 31:0 | Length of first pulse | /dev/pio_pulse1On |
| Pulse1Off | 31:0 | Interval between first and second pulse | /dev/pio_pulse1Off |
| Pulse2On | 31:0 | Length of second pulse | /dev/pio_pulse2On |
| Pulse2On | 31:0 | Interval between second pulse and end of cycle | /dev/pio_pulse2Off |
| PulseControl | /dev/pio_pulse2On | ||
| ADC DMA source | 5:4 | 0X = test mode (DAC output); 10 = adc input (normal operation); 11 = adc test signal (count) |
