MRI lab: FPGA controller documentation
From Course Wiki
Revision as of 00:47, 19 June 2010 by Steven Wasserman (Talk | contribs)
Control registers
Register | Field | Bits | Function | device |
---|---|---|---|---|
PhaseIncrement | 31:0 | Set frequency of generated sinewave | /dev/pio_phaseIncrement | |
Pulse1On | 31:0 | Duration of first pulse | /dev/pio_pulse1On | |
Pulse1Off | 31:0 | Interval between first and second pulses | /dev/pio_pulse1Off | |
Pulse2On | 31:0 | Duration of second pulse | /dev/pio_pulse2On | |
Pulse2Off | 31:0 | Minimum interval between end of second pulse and first pulse repeat | /dev/pio_pulse2off | |
PulseControl | /dev/pio_pulseControl | |||
5:4 | 00 = adc input (normal operation); 01 = adc test signal (count); 10 = test mode (DAC output); 11 = test mode (constant 0xDEADBEEF) | |||
3 | ADC gate enable | |||
2 | 0 = carrier; 1 = trigger |
API |