# Difference between revisions of "Assignment 6, Part 1: Pre-lab questions"

MAXINE JONAS (Talk | contribs) (→Question 1) |
|||

Line 9: | Line 9: | ||

==Question 1== | ==Question 1== | ||

− | |||

Consider the following circuit composed of a network of resistors: | Consider the following circuit composed of a network of resistors: |

## Latest revision as of 20:28, 3 April 2018

This is Part 1 of Assignment 6.

## Question 1

Consider the following circuit composed of a network of resistors:

## Question 2

Referring to the circuit shown below, what value of $ R_L $ (in terms of $ R_1 $ and $ R_2 $) will result in the maximum power being dissipated in the load? |

Hint: this is much easier to do if you first remove the load, and calculate the equivalent Thevenin output resistance $ R_T $ of the divider looking into the node labeled $ V_{out} $ (the Electronics primer has a section on Thevenin Equivalent circuits). Then express $ R_L $ for maximal power transfer in terms of $ R_T $.

## Question 3

In the following circuit, R = 10 kΩ and C = 10 nF.

Note: You may find the pages on Impedance Analysis and Transfer Functions and Bode Plots helpful for this problem.

Back to 20.309 Main Page.