Difference between revisions of "20.109(S17): TA notes for orientation"
From Course Wiki
(→Station 1: pipetting) |
(→Station 1: pipetting) |
||
Line 4: | Line 4: | ||
==Station 1: pipetting== | ==Station 1: pipetting== | ||
− | Prepare at | + | Prepare at instructors bench: |
− | * | + | *cuvette boxes out |
− | * | + | *25 mL of DI water in conical tubes (students can refill from sink) |
− | + | *~30 mL XC 0.01% aliquoted in conical tubes | |
− | + | ||
− | * | + | |
Each group uses: | Each group uses: | ||
*~10 mL water | *~10 mL water | ||
− | *~ mL XC 0.01% | + | *~4 mL XC 0.01% |
*10 non-UV cuvettes | *10 non-UV cuvettes | ||
Revision as of 16:03, 6 September 2017
Contents
Station 1: pipetting
Prepare at instructors bench:
- cuvette boxes out
- 25 mL of DI water in conical tubes (students can refill from sink)
- ~30 mL XC 0.01% aliquoted in conical tubes
Each group uses:
- ~10 mL water
- ~4 mL XC 0.01%
- 10 non-UV cuvettes
Station 2: making solutions
At the balance:
- Dextrose in 50 mL conical tubes, ~ 3/4 full, 3 of them
- Check weigh boat and stir bar stocks, wash spatulas
All across from Yellow group bench:
- 8x 50 mL conical tubes
- 2x small graduated cylinders (100 mL)
- 2x 0.5 L media bottle filled with distilled water, 2 sets only
- 8x 25 mL pipets, 1 per team plus 2 extra
- 2x pipet bulbs, 2 only
Station 3: spectrophotometer
Specs should be turned on at the beginning of lab. Make sure the DU 730 wavelength scan is set to read between 300 and 900 nm. Prepare one set of reference solutions (prepared according to station 1), including a blank, and leave them on top of the DU 640.
Station 4: gel reading
Wipe down the equipment and the sample card with a damp paper towel to rid dust.
Station 5: lab safety
Be prepared to give hints about where to find the safety shower, fire blanket, and spill kits.
Station 6: graph data in Excel
Be prepared to answer questions about this version of Excel.
Station 7: lab math
Be prepared to answer questions about this version of basic lab math.