Difference between revisions of "Optical Microscopy: Part 1 Report Outline"

Revision as of 22:28, 9 February 2014

1. Apparatus:
   • Include a block diagram of your microscope, including all optical elements and relevant distances. It is not necessary to document the details of the mechanical construction.
   • Describe your design calculations and considerations.
   • Why not put in a nice snapshot of your &lsquot;scope? (optional, but certainly a cherished memory in the making)
2. Magnification
   1. Procedure
      • Document the samples you used and how you captured images (camera settings, software used, etc…)
   2. Data
      • Include example images.
   3. Analysis and Results
      • Report the nominal and actual magnifications and fields of view you measured in a table.
      • Document the method you used to find magnification.
      • List the error sources that contributed significantly to systematic error and uncertainty in your measurement. To the degree possible, quantify the type and magnitude of the error.
   4. Discussion (optional for magnification measurement)
   • Explain any challenges you faced in the magnification measurement.
3. Particle diameter measurement
   1. Procedure
      • Document the samples you used and how you captured images (camera settings, software used, etc…)
   2. Data
      • Include example images.
   3. Analysis and Results
      • Report the average size of the microspheres in each sample and a measure of variation.
      • Describe how you measured the microspheres.
      • List the error sources that contributed significantly to systematic error and uncertainty in your measurement. To the degree possible, quantify the type and magnitude of the error.
4. Discussion
   • Explain any challenges you faced measuring the size of silica microspheres.
   • How did your measurements differ from the reported values? What factors contributed to the difference?