Difference between revisions of "BE Classroom Computer Documentation"

From Course Wiki
Jump to: navigation, search
(How to build a machine)
(Installed software on master image)
Line 8: Line 8:
  
 
==Installed software on master image==
 
==Installed software on master image==
*
+
* Firefox browser ( download latest from http://www.mozilla.org/en-US/firefox/new/)
 
* Matlab (download latest from http://www.mathworks.com)
 
* Matlab (download latest from http://www.mathworks.com)
 
* National Instruments DaqMX (course share or http://www.ni.com/support/)
 
* National Instruments DaqMX (course share or http://www.ni.com/support/)

Revision as of 19:31, 8 August 2014

This page contains documentation related to the desktop computers in the BE lab, 16-352.

How to build a machine

  1. Install current version of Windows (or some better operating system)
  2. Create Learning Biologic Geanie account
  3. Install software below on master image, test, copy to all other computers

Installed software on master image

Course share software can be found at \\win.mit.edu\dfs\departmental\bioeng\bioenglab\20.309\Instructors\Software

AVT Manta GigE camera parameters

Computer NIC:

  • Go to Realtek PCI BBE:Properties:Configure:Advanced
    • JumboFrame: 7kB MTU

Connection uses only:

    • AVT & Prosilica (checked)
    • IPv4 (checked)
      • Fixed IP: 169.257.100.1
    • subnet mask: 255.255.0.0
    • All else UNCHECKED

Camera NIC:

  • Via GigEIPConfig program
    • Fixed IP: 169.254.100.2
    • Subet mask: 255.255.0.0.
    • Gateway: 169.254.0.1